Download The BSP Image Here

MD5： ccb8d30afd192ad3629133452f66d683

Overview

• Release Date: 2025/04
• Support Product: MIC-711-OX4A1

Flash Step

Device Connection

Entering Recovery Mode

1. Power Off

   • Make sure the MIC-711 is completely shut down.

2. Connect USB Cable

   • Use a USB Type-A to Micro USB cable to connect the MIC-711 (Micro USB port) to your host PC.

3. Prepare to Enter Flash Mode

   • Do not power on the device yet.
   • Press and hold the REC button.

   

4. Power On and Reset

   • While still holding the “REC” button, plug in the power cable to turn on the device.
   • Press the “RST” button once.

5. Hold and Release

   • Keep holding the “REC” button for about 5–10 seconds, then release it.

6. On Host PC,verify recovery mode by checking if NVIDIA Corp is detected:

   lsusb | grep "NVIDIA Corp"

   Expected output: 0955:7323 NVIDIA Corp

Start flash BSP

Run Command on Host PC

• Extracted BSP image file

$ cd Desktop/
$ sudo tar -zxvf MIC-711_OrinNX_6.1.0_V1.0.0_SDK.tbz2

• Switch Directory

$  cd Desktop/MIC-711_OrinNX_6.1.0_V1.0.0_SDK

• Make sure host pc connects to net cable, and can access network. Run below command to check

$ sudo ./tools/l4t_flash_prerequisites.sh

• To flash QSPI + NVME SSD:

$ sudo ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 -c tools/kernel_flash/flash_l4t_external.xml -p "-c bootloader/t186ref/cfg/flash_t234_qspi.xml" --showlogs --network usb0 p3509-a02+p3767-0000 internal

Note

• Please not use Vitrual Linux as host because there is easily usb problem.
• Please not use USB Hub between host PC and MIC device.
• Please not use account root to execute command.
• Please attach HDMI monitor to MIC device, until flash process had done and MIC boot in OS